Miracle Corp QuickFinder Clipper Deluxe – MC3489

The new QuickFinder deluxe is a nail clipper for larger dogs that utilizes QuickSensor Technology that senses your pet's quick and gives visual clues as to when it is safe and when it is not safe to begin clipping. Red-Yellow-Green. Green means Go! It is fast, safe and easy to use. QuickSensor senses with a circuit-board precision, when it is safe to cut, when to be cautious, and when it is not safe to cut.

QuickSensor senses with a circuit-board precision, when it is safe to cut, when to be cautious, and when it is not safe to cut. The The QuickFinder deluxe is designed for high volume usage (e.g. grooming salons, veterinary offices, or animal shelters).

How Does It Work? QuickFinder deluxe works on amazing Quicksensor technology that senses your pet's quick and gives you visual clues as to when it is safe and when it is not safe to begin clipping. The patented QuickSensor detects the changes in frequencies in your pet’s nail due to sensing of the blood vessels and nerve endings in the quick. When the blood vessels or nerve endings are detected, the red light will illuminate. As you move the QuickFinder slowly toward the tip of the nail, the light will change to yellow (caution) and finally to green - safe to cut. The QuickFinder deluxe is battery operated and includes two (2) LR44 (AG13) batteries.

How To Use:

Step 1: Keeping nails, fingers, and paws away from the clipper sensor and cutting blades, turn the clipper on by pushing and releasing the power button (see Illustration 4). When the unit is turned on, the YELLOW light will blink on the frosted signal strip and will continue to blink for several seconds (see Illustration 5). When the unit has self-calibrated (the sensor has readied itself), the YELLOW light will turn off and only the RED light will remain on. Then release the safety latch. If you release the safety latch before powering on the unit, the unit will not calibrate properly. (Power on first) The QuickFinder deluxe is now ready to begin clipping your pet’s nails.

Step 2: With sensor ready to read the quick and with the sensor facing the paw, insert nail tip through cutting blades. Be sure the nail is positioned toward the sensor. The clipper and sensor are designed to operate correctly when the cutting blades are at a right angle to the nail. Keep the nail at a right angle to the clipper blades throughout the process. The sensor registers blood in the quick, but will also register blood in your pet’s paw or in your own finger. It is important to be sure only the quick in your pet’s nail is being detected and not the blood from your hand or your pet’s paw. Be sure to keep the paw and your hand and fingers away from the sensor.

Step 3: With the tip of the nail inserted through the cutting blades, move the clipper toward the paw to the base of the nail (see Illustration 10). The light will remain RED even after it has detected the quick. Once the QuickFinder deluxe has detected the quick at the base of the nail, begin moving cutting blades back toward tip of nail (see Illustration 11) until the frosted signal strip illuminates GREEN indicating you have cleared the quick and it is safe to cut. (The YELLOW light may briefly illuminate as the blade and sensor approach the area of the nail near the quick. It is not safe to clip when YELLOW or RED lights are on.)

Step 4: While maintaining position and angle (90º) of clipper, squeeze handles together in firm swift motion to avoid crushing nail. It is normal for GREEN light to turn off at end of clipping action after blade has cut through nail. If RED light stays on, power off device and restart clipping process (Step 1). The QuickFinder deluxe will automatically turn off in open position (Handles not depressed).